Enclosure: 8-3/4” X 10-1/2” X 6” including the hinge and the latch. For indoor and outdoor use.
Sensor Assembly: Option A; use the “spark plug type sensors” or Option B; for deionized or demineralized water we can supply a Stainless Steel Float switch for the holding tank. We will need the Sensor Form filled out and returned in this case. In both applications the sensors should never need to be replaced because of the way we power the sensor system.
Electrical: This unit can be supplied with 220VAC, 110VAC or 24VAC and it has Relay Contacts rated 30AMPS at 250Volts and Dry Contacts rated 0.5AMPS at 60Volts.
WaterLine Controls™ is a user friendly product that is easy to install and monitor. It connects into the building management system. It is used as a low water or cut-off device.
PROUDLY MADE IN THE U.S.A.
All of our liquid level controls and liquid level sensors are assembled right here in the U.S.A.
where we monitor every step of the process.
NOT SURE WHAT YOU NEED? JUST CALL BECAUSE WE’RE HERE TO HELP! 1-888-905-1892
We offer products comparable to the products offered by the above companies. See our website pages for further information on the products. The tradenames and trademarks in this page are owned by their respective companies or are the same name as the company. They are mentioned for comparison purposes only. They are in no way affiliated with System Dynamics, Inc or WaterLine Controls.