SWS5000 – Fill with High and Low Alarm
Complete Kit Includes:
- Sensor With 50 ft. Sensor Wire*
Submittal Package PDFs
- Fill w/ High Alarm
- 3-Contact point system
- 8-wire Dry contacts to BMS for measuring:
- Fill “ON” time
- Low Water Alarm
- High Water Alarm
- Fault conditions
- Operates any 110VAC valve & 110VAC audible alarm (Not supplied in this kit, see option section)
With a fill, high and low alarm (or switch), this is for use in those situations where you want to protect from every possible scenario and manage it to protect all the pumps and the electrical features of a system.
Applications for this product might be in an underground vault where all the pump equipment and electrical controls are stored. Whenever the vault is close enough to the environment it could run the risk of flooding caused by a failure of any sort. The SWS5000 can be wired to help prevent a faulty valve from causing such damage.
The level control system monitors for a high water level condition and a low water level condition.
These conditions have three outputs each which will:
- Close a set of dry contacts for the BMS
- Operate a relay rated at 30AMPS for 250VAC
- Turn on an LED to indicate the sensor has tripped
The Control Panel has visual displays indicating power to the level control panel, when the control panel is actively filling and the high and low water alarms. The Fill dry contacts can be used as a comparative to develop a baseline benchmark of water usage for the system.
*Custom Sensors lengths available upon request.
If you are a Reseller, Sales Organization, Distributor, Contractor or an OEM we want to talk with you to determine an SPA price program for your organization so please call us at 1(888) 905-1892 or contact us now.